4.7
FITTING AND ATTACHING THE UPRIGHT
SUPPORTS (PV) TO THE WALL PLATING:
With reference to the plating closure, place the
first superior and inferior joining-pieces PU in
that point (To plug all closure screws TT). Use a
trim piece to calculate the distance between the
joining pieces PU. Attach an upright support (PV)
to the first bottom joining piece by the central
screw T. Then attach it in the same way to the top
PCF
PV
joining piece. Next, fit the rest of the screws T (3
+ 3 per support). Proceed in this way until all the
upright supports are attached at top and bottom.
Take one PLY to calculate the distance be-
tween the pressed profiles PU.
NOTE: Upright supports should be perfectly
vertical all around the pool (take the wall plate
ribbing as a reference.
PU
T T
1ª PU
installation
instalación
T
*
1 9
E N