Publicité
Les langues disponibles
Les langues disponibles
4.5
ATACHING THE LINER:
Locate the welded seam of the wall (W), which
can be used as a guide for fitting the pool liner.
Starting from that point, hang the top edge of
the liner over the wall plating so that the weld
(W) is perfectly straight and perpendicular to the
ground. as you hang the liner, hold it in place
provisionally with clothes pegs. Ensure there is a
uniform overlap. Distribute any excess observed
in the liner wall on completing this operation
evenly around the pool to prevent wrinkles. If the
liner wall is too short, stretch it evenly all around
the perimeter.
W
L
LINER
E N
installation
CH
1 7
Publicité
