Publicité
Final Installation
Media Arrangement
Follow the instructions below for information on how to add and arrange media in your fireplace:
•
Do not place any type of media on the pilot or in front of the pilot . Keep 1" (25 mm) distance from the pilot to
allow correct operation of the pilot .
•
Logs are specifically designed to fit over many of the burners . Please ensure that the logs fit properly for best
operation .
•
Keep the pilot front cover view open to be able to view the pilot spark and flame from outside .
•
Use only fire glass and ceramic chips provided with unit . All other materials will void warranty .
•
When the fireplace glass is removed and media is placed, ensure the fire glass does not fall on the glass lower
frame as that may cause breakage when putting back the front glass .
•
Make sure pilot is clear of any fire glass pieces .
•
Maintain minimum distance of ¼" (6 mm) from media to the fireplace glass panels .
•
Refer to this manual for instructions on how to remove, replace, and arrange the fireplace logs and glass media .
FMG3326F-LP, FMG3726L-LP, FMG3726R-LP, FMG4126B-LP
1 . Arrange fire glass in the above configuration . Ensure that glass is not
placed in circled areas .
2 . Install the two burner logs over the burners as shown above . Once
placed, ensure the logs do not move .
59
FMG3326F, FMG3726L, FMG3726R, FMG4126B
FaberFires.com
Publicité
