Télécharger Imprimer la page

Faber FMG3326F Manuel D'instructions page 21

Publicité

Gas Fireplace Operation
MODES OF OPERATION
The room temperature is measured and
compared to the set temperature. The
adjusted to achieve the set temperature.
PROGRAM 1 and 2, each can be
AM
programmed to go ON and OFF
PM
at speci c times at a set temperature.
ON
OFF
1 2
Flame height modulates between high
AM
and low. If the room temperature is
lower than the set temperature, the
period of time. If the room temperature
higher than the set temperature, the
period of time. One cycle lasts approx.
20 minutes.
THERMOSTATIC MODE
ON:
▪ Press
OFF :
1. Press
2. Press
3. Press
4. Press
SETTING:
1. Press
2. To adjust set temperature press
3.
21
Thermostatic Mode
ame height is then automatically
Program Mode
Eco Mode
ameheight stays onhigh for a longer
ame height stays on low for a longer
button.
is displayed, preset temperature is
displayed brie y, and then room
temperature is displayed.
button.
or
button to enter Manual
Mode.
button to enter Program Mode.
button to enter Eco Mode.
button and hold until
displayed, temperature ashes.
or
button.
To con rm press
button or wait.
PROGRAM MODE
AM
PM
ON
OFF
1 2
NOTE:
The set temperature for Thermostatic Mode is the
temperature for the ON time in Program Mode. Changing
the Thermostatic Mode set temperature also changes
the ON time temperature in Program Mode.
Default settings:
ON TIME (Thermostatic) TEMPERATURE: 70 °F / 21 °C
OFF TIME TEMPERATURE: "
ON
NOTE:
The ON (Thermostatic) and OFF set temperatures are
the same for each day.
is
ON:
▪ Press
button.
, or
,
or
is displayed.
1
2 ON
OFF
OFF
:
1. Press
button.
2. Press
or
button to enter Manual
Mode.
3. Press
button to enter Thermostatic
Mode.
4. Press
button to enter Eco Mode.
" (pilot ame only)
TEMPERATURE SETTING:
1. Press
button and hold until
ashes ON and set temperature
(setting in Thermostatic Mode) is
displayed.
2. To continue press
button or wait.
OFF is displayed, temperature
,
ashes.
3. Select OFF temperature by pressing
the
or
button.
4.
To con rm press
button.
DAY SETTING:
ashes. Press
5.
or
choose between
,
, , .
6.
To con rm press
button.
button to
, , , , ,
FaberFires.com

Publicité

loading