Publicité
Installation Preparation
Fireplace Positioning
Once the fireplace has been set to the upright position, it can be moved to its final installation location .
•
Make sure the control unit is secure and not dragging on the floor during transport and positioning .
•
Unit should remain on the pallet during transport inside the site location .
•
When positioning the fireplace, take into consideration the clearance requirements and framing .
•
Ensure unit is level . Adjust feet to level unit if necessary .
•
Attach the fireplace top brackets to the metal stud in the back to secure the fireplace . The bracket
length can be adjusted by releasing the screws on the top .
Fireplace should remain on the wood pallet when carried to final installation location.
Do not attempt to use a pallet jack or any other moving tools if the unit has been
removed from the wood pallet as it may harm the fireplace components under the unit.
27
FaberFires.com
Publicité
