Publicité
Les langues disponibles
Les langues disponibles
Other countries:
It should be used with flexible hose that is suitable for use with
butane and propane gas. Hose length should not exceed 1.50 m.
To connect the gas hose to the appliance, you have to mount a
coupling on the gas tube of the appliance. The appliance comes
with two couplings, both intended for particular countries:
Country
BE, CH, CZ, DK, ES,
FI, GB, IE, IT, PT, SI
FR
lf your country is not in the table, use the coupling that
complies with your national standards.
A
B
6.3.1
C
A
oupling
You need a 19 mm spanner and a cross-slotted screwdriver.
1.
Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 19 mm spanner (B).
A
2.
Slide the hose over the coupling (C) and tighten the
clamping ring with a cross-slotted screwdriver (D).
C
6.3.2
C
B
oupling
You need a 22 mm spanner and an adjustable spanner.
1.
Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 22 mm spanner (B).
8
Coupling
Coupling A
Coupling B
B
D
www.barbecook.com
A
2.
Screw the gas hose on the coupling (C) and tighten it with
two spanners. Hold the coupling with a 22 mm spanner,
while tuming the hose with an adjustable spanner (D).
C
6.4 Connecting the hose and cylinder to
the regulator
Depending on the type of pressure regulator you use, you need a
cross-slotted screwdriver and/ or an adjustable spanner.
1.
Connect the hose to the pressure regulator. Do one of the
following:
•
If the hose has a clamping ring, slide the hose over the
regulator and tighten the clamping ring with a cross-
slotted screwdriver (A).
•
If the hose has a nut, screw the hose on the regulator
and tighten the nut with an adjustable spanner (B).
2.
Connect the pressure regulator to the gas cylinder. Do one
of the following:
•
If the regulator has a nut, screw the regulator clockwise
on the cylinder and tighten the nut with an adjustable
spanner (C).
•
If the regulator has a screw thread, screw the regulator
counter-clockwise on the cylinder (D).
Use only regulators complying with EN 16129.
B
D
Publicité
