Barbecook SIESTA 412 BLACK EDITION Mode D'emploi page 13

Damages caused by blocked burners and venturis are
regarded as inadequate maintenance and are not covered
by the warranty.
11.3.2 W
hen CleAn the Burners And venturis
You have to clean the burners and venturis of your appliance:
• Before the first use after a long period of non-use.
• At least twice a year, of which once at the beginning of the
season.
11.3.3 t
o CleAn the Burners And venturis
1. Remove the burners from the appliance as shown on the
illustrations. lf you notice that a burner is damaged, you
have to replace it.
A
B
2. Clean the burners and venturis with a small brush or a
homemade pipe cleaner (an unfolded paperclip, a pipe
brush ... ).
3. Put the burners back. Make sure to place the venturis over
the openings of the gas valves.
11.4 Maintaining enamel, stainless steel,
chrome and powder coated parts
The appliance is composed of enamelled, stainless steel,
?
chromed and powder coated parts. Each material has to be
maintained differently:
Material
Enamel
Stainless steel
and chrome
Powder coated
To prevent formation of rust on stainless steel, avoid
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not covered
by the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance
is composed. This list includes a symbol that specifies the
material of each part, so you can use it to check how you have
to maintain a particular part. The parts list uses the following
symbols:
Symbol
www.barbecook.com
How to maintain this material
• Do not use sharp objects and do
not knock against a hard surface.
• Avoid contact with cold liquids
while still hot.
• You can use metal sponges and
abrasive detergents.
• Do not use aggressive, abrasive or
metal detergents.
• Use soft detergents and let them
act on the steel.
• Use a soft sponge or cloth.
• Rinse thoroughly after cleaning
and dry well before storing.
• Do not use sharp objects. Use soft
detergents and a soft sponge or
cloth.
• Rinse thoroughly after cleaning
and dry well before storing.
Material
Enamel
Chrome
Stainless steel
Powder coated
13