Troubleshooting - Bresser National Geographic 90-66000 Mode D'emploi

STOP THE ALARM SOUND
The alarm will sound for 2 minutes with increasing intensity.
To stop it, press ALARM while the alarm is sounding to disable the
alarm.
Note:
For weekday alarm, pressing ALARM will only disable the alarm for the
current day. The alarm will be activated again the next day (if it falls be-
tween Monday and Friday). If the alarm is not interrupted by pressing
the ALARM key while the sound is active, it will repeat itself three times,
every 8 minutes. If you want to stop the alarm during one of the 8 minute
silent periods, you have to follow the steps described in the section titled
'Activating/Deactivating the Time Alarms'.

5. TROUBLESHOOTING

In case of a malfunction, always check the batteries and, if necessary,
replace them in the base station and in the outdoor sensor(s).
Please also check the list below for solutions before contacting customer
service.
Issue
Base station
Outdoor sensor
44
Symptom
Radio-controlled
time signal is not
received
Cannot locate
remote sensor
Solution
Place unit by the window and keep
it there overnight
Check batteries
Check location
Press and hold
station to search for the signal from
the outdoor sensor
▼
on the base