Troubleshooting - Bresser TemeoTrend SW Mode D'emploi

3. Set Alarm Hour: Press UP (▲) or DOWN (▼) to adjust. Press
and hold either button for fast changes.
4. Set Alarm Minutes:
Press UP (▲) or DOWN (▼) to adjust. Press and hold either
button for fast changes.
Press ALARM to confi rm your selection
5. Upon completion the display will be returned to the alarm
selection screen.
Note: Pre-alarm cannot be activated if weekday alarm or single
alarm is not enabled.
STOP THE ALARM SOUND
The alarm will sound for 2 minutes with increasing intensity.
To stop it, press ALARM during the Alarm Sound to disable the
alarm.
Note: For weekday alarm, pressing ALARM will only disable the
alarm for the current day. The alarm will be activated again the next
day (if it falls within Monday to Friday). If the Alarm is not interrupted
by pressing the ALARM key while the sound is active, it will repeat
itself after 8 minutes for 3 times. If you want to stop the alarm in
one of the 8 minute periods, you have to do as described in „Acti-
vating/Deactivating the Time Alarms".

5. TROUBLESHOOTING

In case of a malfunction, always check the batteries and replace
them in the main unit and in the sensor(s) with new ones.
Please also check below issues before contacting customer ser-
vice.
46