Publicité
Les langues disponibles
Les langues disponibles
Clean the water inlet filter
WARNING
Contact an EUROM authorized professional if the filter needs to be replaced.
CAUTION
Remove the filter with the help of pliers.
1.
Make sure the device is off.
2.
Remove the water supply.
3.
Unscrew the garden hose coupling
(Figure 21, pos. 2).
4.
Pull out the filter (Figure 21, pos. 1).
5.
Clean the filter under running water.
6.
Put back the filter.
7.
Put back the water garden hose coupling.
Clean the nozzle(s)
1.
Make sure the device is off.
2.
Remove the water supply.
3.
Remove the nozzle (Figure 22, pos. 2) from
the jet gun (Figure 6, pos. 7).
4.
Clean the nozzle with the cleaning pin
(Figure 22, pos. 1).
5.
Flush it thoroughly (against the direction of
the high-pressure jet).
50
Figure 21
Figure 22
Publicité
