Publicité
Les langues disponibles
Les langues disponibles
Lock and unlock the trigger
1.
If applicable, release the trigger
(Figure 15, pos. 2).
2.
Turn the trigger (Figure 15, pos. 1) lock.
Start
1.
Make sure the ON(I)/OFF(0) switch is in the OFF(0) position (Figure 5, pos. 10).
2.
Open the external water supply completely.
3.
Unlock the safety lock under the trigger (Figure 7, pos. 1).
4.
Squeeze the trigger (Figure 7, pos. 2) for several seconds to remove the air from the
hose.
5.
Switch the device on (Figure 5, pos. 10).
Cleaning
WARNING
Be aware of the kickback when squeezing the trigger.
CAUTION
When you stop temporary:
•
•
•
1.
Hold the jet gun (Figure 6, pos. 7) with both hands.
2.
Aim the jet gun at the object that needs to be cleaned.
3.
Squeeze the trigger (Figure 7, pos. 2) and start cleaning.
Cleaning with floor cleaner
1.
Hold the jet gun (Figure 6, pos. 7) with both hands.
2.
Place the floor cleaner (Figure 6, pos. 3) on the surface the be cleaned.
3.
Squeeze the trigger (Figure 7, pos. 2) and start cleaning.
turn the device off;
close the external water connection;
remove the power plug.
Figure 15
45
Publicité
