Publicité
Les langues disponibles
Les langues disponibles
SISTEMAS
MEMOKEY 100C
MEMOKEY 100C
Total reset - all codes
This operation is useful to ensure that any codes previously stored in the system are
deleted.
The operation should be carried out as a first step before starting to program the users.
The sequence is as follows:
1. Enter PROGRAMMING mode
Key in the Master code, 1480 by default, although
this may be changed if you wish, as explained in
this manual.
2. Key in "A 9 ".
3. Key in "B".
4. Wait 3 seconds for memory to delete.
A "long beep" is heard.
5. Exit PROGRAMMING mode
Key in "A A" to exit programming.
The system also exits this mode automatically after
20 seconds inactivity.
NOTE:
Reset is an irreversible operation, so the codes stored previously cannot be
recovered.
All manuals and user guides at all-guides.com
beep-beep
1480
A9
beep
B
beeeeep
beep-beep
A A
Pag 5
Publicité
