Publicité
Les langues disponibles
Les langues disponibles
V1.0
the tool should electronically malfunction or break down, grounding provides
a low resistance path to carry electricity away from the user.
a.
Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b.
Do not use any adapter plugs.
9.
This device is only for use on 120 V (single phase) and is equipped with a
3-prong grounded power supply cord and plug.
10. DO NOT use this device with a 2-prong wall receptacle.
a.
Choose an available 3-prong power outlet.
b.
Replace 2 prong outlet with a grounded 3-prong receptacle, installed
in accordance with the CE Code and local codes and ordinances.
WARNING! All wiring should be performed by a qualified electrician.
ELECTROMAGNETIC FIELDS
WARNING! Shut off the electrical tool or device and move away if you feel faint,
dizzy, nausea or shocks. Seek medical attention.
Electromagnetic Fields (EMF) can interfere with electronic devices such as
pacemakers. Anyone with a pacemaker should consult with their doctor before
working with or near a tool that generates an EMF. The following steps can
minimize the effects of electromagnetic fields.
1.
Keep the power source and any power cables as far away from the user as
practical. A minimum of 24 in. is recommended.
2.
Avoid long and regular bursts of energy while operating the tool. Use the
tool for short or intermittent periods of time. This will prevent a
pacemaker from interpreting the signal as a rapid heartbeat.
3.
Alert other people in the work area, so they can take precautions or can
watch out for those with a pacemaker.
MOTOR PRECAUTION
NOTICE! To avoid motor damage, this motor should be blown out with dry,
compressed air or vacuumed frequently to keep particulates and dust from
interfering with normal motor ventilation.
1.
If the motor does not start, turn the tool off and unplug it. Check the saw
blade to make sure it turns freely. If the blade is free, try to start the
motor again.
Visit www.princessauto.com for more information
4 x 6 in. Metal Cutting Band Saw
9113465
9
Publicité
