Publicité
Les langues disponibles
Les langues disponibles
V1.0
OPERATION
TO CONVERT THE BAND SAW FOR
VERTICAL USE
1.
Remove the Locking Pin (#126) from the Body
Frame (#93).
2.
Raise the Body Frame to its full vertical position.
Turn the Support Plate (#127) clockwise until it
firmly locks into the Body Frame and insert the
Locking Pin to lock the Body Frame into
position (Fig. 9).
3.
Remove the Screw (#142) and Flat Washer (#141) to
open the Blade Back Cover (#82 [Fig. 10])
4.
Remove two Screws (#78) and remove the
Horizontal Cutting Guard (#71 [Fig. 11]).
5.
Close the Blade Back Cover and secure with the
Screw and Flat Washer.
6.
Guide the Saw Blade through the slot in the Vertical
Cutting Table (#134), and secure the Vertical Cutting
Table in position with the two Screws (#78 [Fig. 12]).
7.
Mount the Vertical Cutting Table
Support (#136 [Fig. 13]).
a.
Insert one Screw (#135) downward through the
mounting hole in the Vertical Cutting Table.
b.
Attach the top section of the Vertical Cutting
Table Support (#136) to the Vertical Cutting Table
using one Flat Washer (#8) and one Nut (#6).
c.
Loosen the Bolt on the Body Frame (Fig. 13-1).
d.
Position the Vertical Cutting Table Support
between the Body Frame and the head of
the Bolt.
e.
Firmly retighten the Bolt.
Visit www.princessauto.com for more information
4 x 6 in. Metal Cutting Band Saw
9113465
13-1
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
15
Publicité
