Publicité
Les langues disponibles
Les langues disponibles
9113465
25-1
25-2
CARE & MAINTENANCE
WARNING! To prevent serious injury from accidental operation, turn the power
switch of the tool OFF and unplug the tool from its electrical outlet before
performing any procedure in this section.
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Keep the tool handles clean, dry and free from oil/grease at all times.
6.
Maintain the tool' s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
24
4 x 6 in. Metal Cutting Band Saw
25-5
25-6
25-3
25-4
25-7
For technical questions call 1-800-665-8685
V1.0
25-8
Fig. 25
Publicité
