Power Fist 9113465 Mode D'emploi page 5

V1.0
3. Maintain proper adjustment of blade tension, blade guides, and blade guide
bearings. Lower the body frame, spin the blade and check for clearance. If the
blade hits anything, adjust the blade (see Adjustments under Operations).
4. Always handle the band saw blade with care when mounting or removing
it. Wear heavy-duty work gloves to protect your hands.
5. Always wait until the motor has reached full speed before starting a cut.
6. Always be aware of the position of your hands relative to the blade. Avoid
awkward hand positions where a sudden slip could cause a hand to move
into the blade.
7. Adjust upper guide to just clear workpiece
8. Never reach behind or beneath the blade.
9. Never leave the tool unattended when it is plugged into an electrical
outlet. Turn off the tool and unplug it from its electrical outlet
before leaving.
10. Turn off the tool and allow the blade to stop on its own. Do not press
against the Saw Blade to stop it.
11. Do not lean on the Band Saw when the tool is in its upright position.
12. When moving the Band Saw, always have the body frame (#93) lowered to its
horizontal position and the Locking Pin (#126) inserted in the Pivot (#47).
POWER TOOL PRECAUTIONS
1. Do not use a power tool with a broken or inoperative
trigger/power switch.
2. Do not allow the tool to run without load for an extended period of time,
as this will shorten its life.
3. Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
4. Avoid unintentional starting. Ensure the switch is off when connecting to
the power source.
5. After making adjustments, make sure that any adjustment devices are
securely tightened.
6. Remove adjusting keys and wrenches before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool increases the
risk of personal injury.
7. Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. If your tool runs
Visit www.princessauto.com for more information
4 x 6 in. Metal Cutting Band Saw 9113465
5