Power Fist 9113465 Mode D'emploi page 4

9113465
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use this
tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Make sure the tool is located on a flat, level, sturdy surface capable of
supporting the weight of the tool and workpiece.
3. Always use the vise to clamp the material in place.
4. Make sure the blade is sharp, undamaged and properly aligned.
5. Make sure to firmly press the workpiece against the Table and/or secure
the vise. Never cut freehand as the material may twist out of your hand or
your hand may be drawn into the saw blade.
6. Never cut more than one workpiece at a time.
7. Never turn the Band Saw ON before clearing everything off the table,
except the workpiece and related support devices.
8. Read and understand all warning labels on the tool.
9. Never stand on the tool. Serious injury could occur if the tool tips over or
if the cutting blade is unintentionally contacted.
BAND SAW PRECAUTIONS
DANGER! When the tool is in operation, keep hands away from the saw blade
and the area it is being applied to. Failure to follow this warning will result in
amputation, serious personal injury or death.
1. Always make sure the band saw is clean before use.
2. Always be sure all components are mounted properly and securely before
using tool. Tighten all clamps before turning power on.
4
4 x 6 in. Metal Cutting Band Saw
For technical questions call 1-800-665-8685
V1.0