JVC GR-AXM1U Manuel D'instructions page 40

40
Downloaded from: https://www.usersmanualguide.com/
LCD monitor
or viewfinder
Audio dubbing
indicator
Mic
REW
PLAY
PAUSE
AUDIO DUB
RM-V20U (optional)
EDITING
Audio Dubbing
You can record a new soundtrack on a prerecorded tape
(normal audio only).
** Perform steps 1, 2 and 3 of the Insert Editing procedure
( pg. 39) before continuing.
FIND EDIT-IN POINT
1
Press REW to go a little beyond the beginning of the
scene onto which you want to dub new audio, press
PLAY to view the recorded tape, then press PAUSE
at exactly the point where dubbing should start.
ENGAGE AUDIO DUB STANDBY
MODE
2
Press and hold AUDIO DUB, and press PAUSE.
BEGIN AUDIO DUBBING
3
Press PLAY. When the counter reaches "0:00:00",
Audio Dubbing stops automatically and the
camcorder enters the playback mode.
NOTES:
● Audio Dubbing may not work correctly if the tape
contains blank segments, or if the recording speed was
changed during the original recording.
● If the camcorder's mike is too close to the TV, or if the
TV's volume is too high, whistling or howling may
occur.
(cont.)