Publicité
Les langues disponibles
Les langues disponibles
20
LCD monitor or viewfinder
NOTES:
● To switch to automatic white balance adjustment, press MWB until the indication disappears, or turn the
● Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned on and
● It is helpful to connect your camcorder to a color monitor when adjusting the white balance
● When adjusted by putting colored paper in front of the subject in step 2 , this unit makes its color
Downloaded from:
https://www.usersmanualguide.com/
White balance mode indicator
No indication
(Auto)
MWB
MWB
PROGRAM AE dial to LOCK.
off again, or when the PROGRAM AE dial's position has been changed.
("BASIC CONNECTIONS"
pg. 33).
temperature standard for automatic white balance. So you can enjoy shooting with different colors. For
example, when adjusting with red, blue or yellow colors, the image becomes the color which aproximates
to green, orange or purple respectively.
RECORDING
Advanced Features (cont.)
White Balance Adjustment
This camcorder's Automatic Color Temperature system
senses the color temperature of the ambient lighting for
automatic white balance adjustment. However, precise
color adjustment is not possible under the following
conditions:
•When an object is in various shades of the same color.
•When a predominantly red or brown object is being
shot outdoors.
In these cases, use the camcorder's built-in preset filters
for white balance adjustment.
SELECT MODE
1
Press MWB (Manual White Balance) until the
required indication appears in the LCD monitor or
the viewfinder.
"
" .............. Outdoors on cloudy day
"
" ............... Outdoors on sunny day
" " ................ Light source is halogen or tungsten
......................
lamp
"MWB" .......... With a memorized personal White
......................
Balance setting (see below)
MWB sets the color temperature for the subject's light
source so you can shoot with natural colors that are
unaffected by surroundings, even when there are
multiple subjects with different color temperatures.
ADJUST FOCUS
1
Point the camcorder at a white, flat object such as a
sheet of white paper, and adjust focus manually
(
pg. 24).
ADJUST WHITE BALANCE
2
Press MWB until "MWB" appears, then press and
hold MWB for more than 3 seconds.
•"MWB" blinks in the LCD monitor or the view-
finder during adjustment, then stops blinking but
stays lit when adjustment is complete.
Publicité
