Publicité
Les langues disponibles
Les langues disponibles
12
Downloaded from:
https://www.usersmanualguide.com/
4
4
2
2
1 1 5
Turn to take
up slack.
Erase Protection
Gear
GETTING STARTED
Loading/Unloading A Cassette
OPEN LCD MONITOR
1
Press PUSH/OPEN and open the LCD monitor to an
angle of over 60 degrees.
3
3
OPEN CASSETTE HOLDER
2
Press EJECT until the holder opens. Do not use force
to open.
INSERT/REMOVE CASSETTE
3
Make sure the label is facing outward.
CLOSE CASSETTE HOLDER
4
Press PUSH and make sure the holder is closed and
locked.
CLOSE LCD MONITOR
5
First make sure the holder is closed. Then close the
LCD monitor.
NOTES:
● Closing the LCD monitor while the cassette holder is
still open may cause damage to the LCD monitor.
● A cassette holder can't be opened unless a power supply is
attached.
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
● Make sure the Erase Protection tab is present. If not,
cover the hole with adhesive tape. (Some cassettes
have sliding tabs – in this case, check the tab's
position.)
(cont.)
Publicité
