Publicité
Les langues disponibles
Les langues disponibles
RECORDING
Program AE With Special Effects
All you have to do to access any of the variety of
shooting effects is to turn the PROGRAM AE select
dial until the desired indication appears in the LCD
monitor or the viewfinder. The mode is activated
about 1 second later.
Auto Mode Lock
Locks the camcorder in Full Auto mode, preventing
incorrect operation due to accidental button
pressing during shooting.
• CINEMA, FADER, FOCUS, EXPOSURE, DISPLAY,
Auto Mode Release
Re-enables the controls that were disabled by Auto
Mode Lock.
Electronic Fog Filter
Makes the picture look misty white, as when an
external fog filter is attached to the lens. Softens the
image and gives it a "fancy" look.
ND Effect
A black mist darkens the picture, as when an ND
filter is used. Helps to counter the effects of glare on
the subject.
Sepia
The scene being shot is recorded in sepia-tinted
(reddish-brown) monochrome, giving the effect of
an older movie. Use together with Cinema
(
Hollywood movie.
Twilight
Disengages the auto gain control and auto focus,
locks focus to infinity and white balance to "
(outdoor) mode. Dusk, twilight scenery, fireworks,
etc., look more natural and dramatic.
Downloaded from:
https://www.usersmanualguide.com/
Advanced Features
MONITOR/
DIAL
VIEWFINDER
SYMBOL
INDICATION
A
LOCK
AUTO LOCK
Auto Mode Lock
TITLES and MWB (Manual White Balance)
controls are disabled in this mode.
M
RELEASE
AUTO RELEASE
FG
FG:FOG
Electronic Fog Filter
ND
ND:ND EFFECT
ND Effect
SEPIA
Sepia
pg. 22) for the authentic look of a classic
TWILIGHT
Twilight
MODE
DIAL
SYMBOL
Sports
High shutter speed clearly captures fast-moving
action.
Auto Mode
Release
1/2000
High-Speed Shutter (1/2000 s.)
Captures faster action than Sports mode.
15 sec. Self-Timer
Lets you delay recording start after Recording Start/
Stop is pressed. If camcorder is secured, operator
can enter scene before recording starts.
1) Set PROGRAM AE dial to " ". "
in LCD monitor or the viewfinder.
2) Press Recording Start/Stop.
•Recording starts after 15 seconds.
•Tally lamp begins blinking; blinking speed
increases about 5 seconds before recording starts.
Blinking stops when recording begins but light
stays on.
NOTES:
● Only one effect can be engaged at a time.
● When the PROGRAM AE select dial is switched
from one mode to another, the newly selected
mode's name and its indication is displayed in the
LCD monitor or the viewfinder for approx. 3
seconds. Then the name disappears, and only the
indication remains.
● The screen becomes slightly reddish when the
fader (
pg. 21) is used in the Sepia mode.
● The screen becomes slightly dark in the High
Speed Shutter mode. Use in well-lighted
situations.
"
● In the High Speed Shutter or Sports modes,
picture color may be adversely affected if subject
is lit by alternating discharge-type light sources
such as flourescent or mercury-vapor lights.
19
Tally lamp
PROGRAM AE
select dial
MONITOR/
VIEWFINDER
MODE
INDICATION
SPORTS
Sports
S 1/2000
High Speed Shutter
SELF TIMER
15 sec. Self-Timer
15S" appears
Publicité
