JVC GR-AXM1U Manuel D'instructions page 13

Downloaded from: https://www.usersmanualguide.com/
Power zoom switch
Recording Start/Stop button
1
3
2
2
1
Grip Adjustment
EXPAND LOOP
1
Separate the Velcro strip.
INSERT HAND
2
Pass your right hand through the loop and grasp the
grip.
ADJUST STRAP LENGTH
3
Adjust so your thumb and fingers can easily operate
the Recording Start/Stop button and Power Zoom
switch. Refasten the Velcro strip.
Shoulder Strap Attachment
ATTACH STRAP
1
Following the illustration at left, thread the strap
through the top of the eyelet
and thread it through the keeper
3
through the buckle . Repeat the procedure to
attach the other end of the strap to the other eyelet,
making sure the strap isn't twisted.
ADJUST LENGTH
2
Adjust as shown in the illustration at left
slide both keepers snug against the eyelets to
2
prevent slipping .
Tripod Mounting
ALIGN AND TIGHTEN
1
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
13
1
, then fold it back
2
, and then
1
, then