JVC GR-AXM1U Manuel D'instructions page 37

RM-V700U (optional)
Downloaded from: https://www.usersmanualguide.com/
REW/FF CANCEL
IN/OUT
R.A. EDIT
PLAY/PAUSE
STOP
To AUDIO and
To EDIT
VIDEO out
connector
Editing cable
(optional 3.5 ø
mini-plug cable) Audio and Video
cable (optional)
A
C
B
To Remote To AUDIO and
PAUSE VIDEO IN
connectors
To Pause-In
VCR (Recording deck)
IN OUT
1 0:00:25
2
3
4
5 IN
6 1 0:00:25
7 2 0:03:18
8 3 0:02:33
COUNTER 0:00:25 4 0:04:11
TOTAL 0:00:00 5
6
7
8
COUNTER
TOTAL
PREPARE CAMCORDER
2
Insert a recorded tape and set the power switch to
PLAY.
PREPARE VCR
3
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR's instructions).
SELECT SCENES
ACCESS R.A. EDIT COUNTER
DISPLAY
1
Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the LCD monitor or the
viewfinder and the screen of the connected TV.
REGISTER BEGINNING OF SCENE
2
Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.
REGISTER END OF SCENE
3
Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.
REGISTER ADDITIONAL SCENES
4
Repeat steps 2 and 3 for each additional scene
(as many as 8).
MAKE CORRECTIONS
5
Press CANCEL during steps 2 and 3 to erase the
most recently registered point.
NOTES:
● There must be at least one second between an in-point
and its corresponding out-point.
● The camcorder prerolls during R.A. Edit, so there must
be at least 15 seconds of recording material prior to any
in-point.
● Blank portions of tape cannot be registered as in-points
or out-points.
OUT
● If it takes more than 5 minutes to search for an in-point,
0:01:05
0:03:31
the VCR's Record-Pause mode is cancelled and editing
0:02:53
doesn't take place.
● Pressing R.A.EDIT clears all in- and out-points from
memory.
0:04:11
● Leave a small margin for error around each in-point to
0:01:13
ensure the scene is recorded in its entirety.
37