Pommier A5442 Notice Originale page 32

MAINTENANCE
• After 1000 km and 2000 km of driving, check the tightening torque of the mounting screws, and
retighten to the recommended torque if necessary.
• As part of the vehicle's routine servicing, check the tightening torques of mounting screws in
accordance with Table 1.
• Periodically apply grease as part of the vehicle scheduled maintenance.
• During testing and use, the operator must ensure that there are no personnel in the area in which
bar movements occur.
•
Maintenance operations must be performed by qualified and accredited personnel. The standard
practices of each specialised trade (mechanics, hydraulics, electricity and pneumatics) must be
respected.
• Ensure that the electric cables and hydraulic pipes are in good condition for use of the underrun bar
(replace them if they are damaged or show signs of advanced ageing).
END OF PRODUCT LIFE
All unserviceable products should be recovered or recycled via the appropriate collection and disposal
organisations.
32/112