Pommier A5442 Notice Originale page 21

Sub-frame
Side rail
A
unladen
at half load
min. 0
max. 100 mm
Tube trimming possible in accordance with the max. 100 mm with respect to the outermost points
of wheels, not taking account of the bulging of tyres on contact with the ground.
Type of bumper
Round tube Ø127 mm
Square aluminium bar
Aluminium bar light bracket
U-shaped welded profile
Type of suspension
Hydropneumatic,
Hydraulic, pneumatic or levelling
device with a departure angle > 8°
Other types of suspension or
Other types of suspension with a
departure angle > 8°
Any type with angle ≤ 8°
Class 1400, 1600, 1900
380 ± 25
MAX. 6°
Width of plate mounting frame from min. 750 to max. 900
Dimension G
(mm) (see
Fig. 1)
max. 450
max. 500
max. 550
Figure 2
Figure 2
Length of bumpers (with plugs)
Table 3
U-SHAPED WELDED
979
1029
1079
Table 4
Rear of
vehicle
Fittings up
to 2 m
G depends on
G
vehicle category
unladen and suspension
min. 0
max. 100 mm
2402 mm
2464 mm
2414 mm
2430 mm
Dimension A (max. (see Fig. 1)
ROUND ALU H150
945 959
995 1009
1045 1059
P is defined
in table 2
ALUMINIUM
LIGHT BRACKET
1001
1051
1101
21/112