TOHATSU MFS 40A Manuel De L'utilisateur page 39

ENOW00032-0
CAUTION
Do not keep turning starter motor for over
5 seconds, or the battery may be con-
sumed, potentially making the engine start-
i n g i m p o s s i b l e a n d / o r d a m a g i n g t h e
starter.
If cranking over 5 seconds fails to start
engine, return main switch to "ON", and
crank engine again after 10 seconds or
more.
7. Check the cooling water from cooling
water check port.
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position. Do not raise the free throttle
lever when starting the engine.
3
1. Neutral (N)
2. Control lever
3. Fully open (Forward)
4. Fully closed (Fully closed)
5. Free throttle lever
6. Main switch key
7. Stop switch
4. Turn the main switch key to ON posi-
tion and confirm three warning lamps
light up with buzzer sound and then go
ENOF00868-0
off.
1. Warning lamp
5. Turn the main switch key to START
position and release the key when the
engine has started. The key returns to
the original position, automatically.
ENOF00869-0
ENGINE OPERATION
1
2
N
5
4
6
7
ENOF00870-0
1
1
ENOF00851-0
ENOF00851-0
37
7