Engine Oil Recommendation - TOHATSU MFS 40A Manuel De L'utilisateur

28
PRE-OPERATING PREPARATIONS
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
6
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
4. After filling the tank, close the fuel tank
cap.
ENOM00037-A

3. Engine oil recommendation

ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before starting engine. (To
properly fill the engine with oil follow the
instructions, See page 64)
1
ENOF00027-A
ENOF00030-B
CAUTION
2
Use only high quality 4-stroke engine oil to
insure performance and prolonged engine
life.
The SAE oil viscosity 10W-30 or 10W-40
FC-W outboard motor engine oil is recom-
mended.
You can also use oils that carry the API rat-
ing of SH, SJ, or SL. Select the appropri-
ate viscosity, based on atmospheric
temperature, from the chart below.
-30 -20
-22 -4
ENOW0002A-A
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
10W−40
10W−30
-10 0 10 20 30
14 32 50 68 86
ENOF00208-0
CAUTION
ENOF00850-0
40 ˚C
96 ˚F