Care And Cleaning - Zanussi ZDI 16011 Notice D'utilisation

• The display shows the programme duration.
• The phase indicators come on.
• The programme starts.
Cancelling the programme
Press and hold function buttons (B) and (C) at the same
time until:
• All the programme indicators come on.
• The display shows 2 horizontal status bars.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
At the end of the programme
When the programme is completed, the end indicator
comes on and the display shows 0.

Care and cleaning

Warning! Before maintenance, deactivate the
appliance and disconnect the mains plug from the
mains socket.
Dirty filters and clogged spray arms decrease the
washing results.
Make a check regularly and, if necessary, clean them.
Cleaning the filters
1
www.zanussi.com
C
B
A
2
1. Press the on/off button to deactivate the appliance.
2. Close the water tap.
If you do not press the on/off button, the AUTO OFF
device automatically deactivates the appliance after
some minutes. This helps to decrease the energy con-
sumption.
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily damaged.
• First remove the items from the lower basket, then from
the upper basket.
There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
3
To remove filters (B) and
(C), turn the handle coun-
terclockwise and remove.
Pull apart filter (B) and
(C). Wash the filters with
water.
A
4
Remove filter (A). Wash
the filter with water.
23