Zanussi ZDI 16011 Notice D'utilisation page 22

1
3
4
Detergent tablets do not fully dissolve with short
programmes and detergent residues can stay on the
dishes.
We recommend that you use detergent tablets with long
programmes.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to accept some
operations.
The appliance is in setting mode when, after the activa-
tion:
• All the programme indicators come on.
22
2
5
If the programme has a
prewash phase, put a
small quantity of detergent
on the inner part of the ap-
pliance door.
• The display shows 2 horizontal status bars.
If the control panel shows other conditions, press and
hold function buttons (B) and (C) at the same time until
the appliance is in setting mode.
Starting a programme without delay start
1. Open the water tap.
2. To set a programme, keep the appliance door ajar.
3. Press the on/off button to activate the appliance.
4. Make sure that the appliance is in setting mode.
5. Press the button of the programme you want to set:
• The programme duration flashes in the display.
• The phase indicators of the set programme come
on.
6. Close the appliance door. The programme starts.
• Only the indicator of the phase in operation stays
on.
• The display shows the programme duration that
decreases with steps of 1 minute.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again until the dis-
play shows the delay time you want to set (from 1 to
24 hours).
• The delay time flashes in the display.
3. Close the appliance door. The countdown starts.
• The display shows the countdown of the delay
start that decreases with steps of 1 hours.
• The phase indicators of the set programme go off.
• When the countdown is completed, the programme
starts.
• The phase indicator in operation comes on.
• The display shows the programme duration.
You can set a programme and the delay start also
with the appliance door closed. In this condition,
you have only 3 seconds after each setting before the ap-
pliance starts to operate.
Opening the door while the appliance operates
If you open the door, the appliance stops. When you close
the door, the appliance continues from the point of inter-
ruption.
Cancelling the delay start while the countdown operates
Press the delay button again and again until:
www.zanussi.com