Stihl MS 271 Notice D'emploi page 43

35 Ordering Spare Parts
34.5 Chain lubrication
Fully automatic, speed-controlled oil pump with
rotary piston
Oil tank capacity:
34.6 Weight
Dry, without cutting attachment
MS 271:
MS 271 C with Easy2Start and Quick
Chain Tensioner:
MS 291:
MS 291 C with Easy2Start and Quick
Chain Tensioner:
34.7 Cutting attachment
The actual bar length may be less than the
specified bar length.
STIHL cutting attachments complying with CSA
Standard Z 62.3:
34.7.1 Rollomatic E guide bars
Bar lengths:
Pitch:
Groove width:
Sprocket nose:
34.7.2 Saw chains .325"
Rapid Micro 3 (26 RM3) Type 3634
Pitch:
Drive link gauge:
34.7.3 Sprocket
7-tooth for .325"
34.8 Additional cutting attachments
Other cutting attachments complying with CSA
Standard Z 62.3 are available: see section CSA-
Standard Z 62.3, "Information Sheet" in saw
chain packaging or ask a STIHL servicing dealer.
Your STIHL servicing dealer will be happy to
help you properly match your engine with the
appropriate bar/chain combinations to reduce the
risk of kickback injury.
35 Ordering Spare Parts
Please enter your saw model, serial number as
well as the part numbers of the guide bar and
saw chain in the spaces provided. This will make
re-ordering simpler.
The guide bar and saw chain are subject to nor‐
mal wear and tear. When purchasing these
parts, always quote the saw model, the part
numbers and names of the parts.
Model
0458-574-8221-D
240 cc (0.24 l)
5.6 kg
6.2 kg
5.6 kg
6.2 kg
40, 45, 50 cm
.325" (8.25 mm)
1.6 mm
11 tooth
.325" (8.25 mm)
1.6 mm
Serial number
Guide bar part number
Chain part number
36 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).
37 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
English
43