to your vehicle by means of lower universal
anchorage system (UAS) in conjunction with
a top tether, both provided with this product.
Refer to the dedicated section in this manual
for installation details and check your vehicle
owner's manual for further details.
• When securing the child seat into the
vehicle, make sure that the seat belt or UAS
stay locked and tight during normal driving.
Refer to the dedicated sections in this manual
for further details.
• This child restraint is designed to be installed
on front facing vehicle seats only. Never use
on seats looking sideways or rearward facing.
Do not use in cars with door-mounted or
motorized shoulder belts. Read your vehicle
owner's manual for additional information.
• When the child restraint is installed on the
vehicle seat, check that vehicle belts or UAS
and top tether straps are snugly fitted around
the child restraint structure and that there is no
slack. An incorrectly fastened child restraint may
result in an additional excursion or deceleration
on your child in case of an accident.
• Complete and send in the registration form
provided with this product right away.
All manuals and user guides at all-guides.com
Warning
In case of accident: if this car seat is involved
in a car accident, it may be no longer safe
for use. You may need to get a new unit. Call
customer service @ 1-800-661-5050 for help.
• Seat covers and pads provided with this
product are part of the product and the
certification program. The use of non
approved covers or other accessories is not
recommended .
• EPS components (white soft foam located
below the upholstered covers) are integrated in
the product as safety related parts and should
never be removed or severely damaged.
• EPP component (black soft part located
behind the shell) is integrated in the product
as safety related part and should never be
removed.
• Secure this child restraint in the car even
when not occupied. This child restraint is a
heavy object that could cause severe damage
to other occupants in case of an accident.
• Do not lift this child restraint by harnesses
to avoid unnecessary wear or stress on the
webbing. Lift it by the hard structure.
• Keep fingers away from moving parts.
- 6 -