Publicité
All manuals and user guides at all-guides.com
Installing your child restraint in the vehicle - Rear Facing mode
IMPORTANT: check inside the shell openings;
verify that the waist portion of the belt is
placed as shown in the picture.
4
4. Buckle the vehicle belt and check under the
5
A
seat that the adjuster strap is not entangled
with the vehicle seat belt.
C
5. Push the child restraint firmly into the
vehicle seat and pull the vehicle belt in order
to eliminate any slack. Follow the procedure
shown in the picture making sure that while
B
the child restraint is pushed down (A), the lap
portion of the belt is pulled from the fixed
point toward the buckle (B). Then pull the
diagonal portion of the belt upwards (C).
- 33 -
Publicité
