Publicité
Installing your child restraint in the vehicle - Forward Facing mode
Important! Remove newborn filler cushion in
forward facing mode (see page 53).
Important! Do not use rebound bar in forward
facing mode.
FORWARD FACING MODE
USING UAS STRAPS
1. Recline the child restraint pulling the
handle located below the front edge of the
shell (A) as shown in detail. This will make
access to the UAS storage area easier.
2. Disconnect the UAS straps from the
storage bar by pushing on the red button and
pulling the straps at the same time.
3. Pull the handle and move the child
restraint to the upright position. You should
hear a "click" when locked in the upright
position. Lean the child restraint on the
vehicle seat making sure that the lock off clips
are closed.
Take the UAS strap from front to rear sliding
the straps along their tubing.
All manuals and user guides at all-guides.com
- 38 -
1
A
B
A
2
3
Publicité
