Publicité
All manuals and user guides at all-guides.com
Installing your child restraint in the vehicle - Rear Facing mode
4. Check under the seat that the adjuster
strap is not entangled with the vehicle
4
5
seatbelt.
5. Push the seat firmly into the vehicle seat
(1) and pull the vehicle belt (2) in order
to tighten the seat, eliminating any slack.
1
6. The picture shows the correct belt path
when the seat is attached to the vehicle using
a lap belt .
6
Once the installation is completed check that
the seat is properly levelled following the
section on page 28.
Verify that the child restraint is secure. A
secure child restraint will not move more than
2.5 cm (1 inch) near the UAS anchors.
- 37 -
Publicité
