Publicité
All manuals and user guides at all-guides.com
Installing your child restraint in the vehicle - Forward Facing mode
4. Attach the lower connectors to the lower
anchors of your vehicle located at the joint
4
5
A
line between the seat and the backrest. Check
your vehicle owner's manual to learn what is
the best place for your car . When the UAS
straps are connected to the lower anchors, an
audible click will be heard. If this is not the
B
case, repeat the operation and double check
that the UAS is attached and working by
trying to pull the lower connector away from
the lower anchor.
5. Push down the child restraint (A) into the
seat with your own body weight and at the
6
same time pull the strap ends (B) in order
to tighten the UAS straps. Check that the
connectors are evenly tightened and that the
seat is not leaning sideways.
6. Attach the TOP TETHER strap to your
vehicle following instructions at page 24.
Verify that the child restraint is secure. A
secure child restraint will not move more than
2.5 cm (1 inch) near the seat belt anchors.
- 39 -
Publicité
