Publicité
All manuals and user guides at all-guides.com
Installing your child restraint in the vehicle - Rear Facing mode
REAR FACING MODE USING
2
UAS STRAP
A
1. Recline the child restraint to the rear facing
position as shown in the picture. To recline
the child restraint, pull the handle located
B
below the front edge of the shell (A) as shown
in detail. An audible "click" is heard when
the seat is properly locked into position.
Note: for easier adjustment, lift the back
of the seat slightly with your free hand to
A
remove some weight from the mechanism.
2. Disconnect the UAS straps from the
storage bar by pushing on the red button
and pulling the straps at the same time.
3. Disengage the rebound bar under the
seat and rotate it until it clicks in position as
shown in picture.
4. Slide the straps toward the front of the
child restraint. Check that the straps are not
reversed. Lean the reclined seat, unoccupied,
on the selected vehicle seat in the rear facing
mode making sure that the front part of the
seat touches the vehicle seat backrest.
- 29 -
Publicité
