Securing your child into the child restraint
6. To adjust the shoulder strap level, from
bottom to top, pull the ring strap located
on top of the headrest until the panel is
disengaged and able to move. Once the
desired position is reached, make sure that
the panel is properly latched.
To adjust the shoulder strap level from top
to bottom pull the ring strap with one hand
and push the panel down with the other
hand at the same time. Check that the panel
is properly latched.
Note: The lower 7 head panel positions can
be used in the rear facing mode. Positions 8,
9 and 10 should only be used in the forward
facing mode.
Check maximum rear facing head panel
height behind the seat (detail in picture 6).
7. Insert both latch plates into the buckle
until you hear them click. Pull on the straps
to make sure that both plates are latched
securely.
All manuals and user guides at all-guides.com
- 49 -
10
9
8
7
6
5
4
3
2
1