Yamaha HTY-7040 Mode D'emploi page 95

Masquer les pouces Voir aussi pour HTY-7040:

Les langues disponibles

You can select the type of audio input signals of the selected input source according to your preference or the conditions

of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2.

We recommend setting the input mode to AUTO in most cases.

(U.S.A. and Canada models)

Set the operation mode selector to YSP.

Press one of the input selector buttons to

select the desired input source.

Selecting the input mode

Press INPUTMODE repeatedly to toggle

between input modes.

When DVD is selected

as the input source

When AUX1 is selected

as the input source

ANALOG is not available as the input mode of DVD and

Automatically selects audio input signals in the following

priority order:

Use this input mode in most cases.

Selects only digital signals encoded in DTS.

Compared to AUTO, this input mode provides greater

stability while playing back CDs or LDs encoded in DTS.

Selects only analog signals.

Even when both digital and analog signals are input

simultaneously, only analog signals are selected.

You can adjust the default input mode to be selected when the

power of this unit is turned on by adjusting INPUT MODE in

INPUT MENU (see page 85).

Selecting the input mode

TV/STB ANALOG

When TV or STB is selected

as the input source

When AUX2 is selected

as the input source