Yamaha HTY-7040 Mode D'emploi page 109

Masquer les pouces Voir aussi pour HTY-7040:

Les langues disponibles

Using the TV macro

The TV macro feature makes it possible to perform a

series of operations with the press of a single button. For

example, when you want to play a DVD, you would

normally turn on the component, select DVD as the input

source, and press the play button to start playback. The TV

macro feature lets you perform all of these operations

simply by pressing the DVD macro button.

• Be sure to set up a remote control code for your TV before

setting macros.

• The ways to set macros differ if your TV does not have the

tuning capability.

• If you press any control buttons on the remote control other than

the ones used to set macros while setting macros, the setting

procedure is automatically canceled.

• If it takes more than 10 seconds in steps 2 and 3, the setting

procedure is automatically canceled. In this case, repeat from

(U.S.A. and Canada models)

Setting macros for the TV with the

tuning capability

Press and hold CODE SET and press one of

the input selector buttons to select the input

source you want to set macros for.

Proceed to step 2 while holding down CODE SET.

While holding

Press MACRO while holding down CODE

While holding

Press CH +/– or the numeric buttons to select

the TV channel.

Check that the TV screen changes to the tuner screen.

Press TV INPUT repeatedly until the screen

changes to the display of the input source

selected in step 1.

Press ENTER to confirm the macro setting.

Remote control features