Yamaha HTY-7040 Mode D'emploi page 90

MANUAL SETUP
e)HDMI CONTROL
OFF
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
p
[ ]/[ ]:Select
[ENTER]:Return
• Select ON to enable the HDMI control. The signals
input at the HDMI IN jacks are output at the HDMI
OUT jack when this unit is in the standby mode.
• Select OFF to disable the HDMI control. The signals
input at the HDMI IN jacks are not output at the HDMI
OUT jack when this unit is in the standby mode.
XM ANTENNA LEVEL (XM antenna level)
(U.S.A. and Canada models only)
Use to display the current reception level of the XM
Satellite Radio signals. For the best reception, orient the
connected XM Mini-Tuner Dock to obtain a value of 60%
or more.
Display status: NONE, 0 to 100%
F)XM ANTENNA LEVEL
XM ANTENNA LEVEL;;;;97%
[ENTER]:Return
Note
"NONE" is displayed if the XM Mini-Tuner Dock is not
connected to this unit. In this case, check the antenna connections
(see page 5 in the Reference Guide).
88
En
p
ON XXXXXXX
DISPLAY MENU
Use to manually adjust the various parameters related to
the display.
SET MENU → MANUAL SETUP → DISPLAY MENU
4)DISPLAY MENU
.
A)F.DISPLAY SET
B)OSD SET
C)UNIT SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
F.DISPLAY SET
(Front panel display settings)
Use to adjust the brightness and display settings of the
front panel display.
A)F.DISPLAY SET
.
STANDARD DIMMER;;;;;OFF
AUTO DIMMER
;;;;;;;;;;;;;OFF
SCROLL;;;;;;;;;;;;CONT.
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display
when you operate this unit by using the control buttons on
the front panel or on the remote control.
Choices: –2, –1, OFF
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period of time,
the front panel display dims. Use to adjust the brightness
of the front panel display in this case.
Choices: OFF (the same brightness as the STANDARD
DIMMER setting), –1 to –3 (based on the
STANDARD DIMMER setting), DISPLAY OFF
SCROLL (Front panel display scroll)
(U.S.A., Canada, and Australia models only)
Use to select the mode to display information in the front
panel display when operating your iPod or XM Satellite
Radio.
Choices: CONT., ONCE
• Select CONT. to continue to scroll the display.
• Select ONCE to scroll the display to the end once, after
which the first 15 characters appear and stay.
p