Yamaha HTY-7040 Mode D'emploi page 94

Adjusting the audio balance
3
Press / to adjust the channel volume.
Control range: –10.0 dB to +10.0 dB
4
Wait for a few seconds without operating this
unit when you have completed your
adjustment.
Notes
• All channel levels cannot be adjusted when the 2-channel or
5-channel stereo playback (see page 62), or My Surround (see
page 57) is selected as the beam mode.
• "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 57).
• Only CENTER can be adjusted when My Beam is selected as
the beam mode (see page 63).
• "FRONT L/R" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 57 and
62).
y
If the level of a particular channel cannot be adjusted, "– –dB"
appears in the front panel display.
92
En
ENTER