Yamaha HTY-7040 Mode D'emploi page 21

Masquer les pouces Voir aussi pour HTY-7040:

Les langues disponibles

Using a metal wall bracket

You can use the optional metal wall bracket (such as SPM-

K30) to mount this unit on the wall in your listening room.

SPM-K30 (Option)

Refer to the instructions supplied with the metal bracket for

details on how to attach the metal bracket to the wall or how to

attach this unit to the metal bracket.

Using a stand

You can mount your TV on a stand placed on a

commercially available rack and install this unit under

Refer to the instructions supplied with the stand for details on

how to install the stand or how to mount and the TV on the stand.

Metal wall bracket

Using a rack

You can install this unit either above or under your TV in a

commercially available rack.

When this unit is installed above your TV

When this unit is installed under your TV

Make sure that the rack is large enough to allow adequate

ventilation space around this unit (see page 17) and that it is

strong enough to support the weight of both this unit and your TV.

Affixing this unit

Peel off the film from each of the four supplied fasteners

and then secure them to the bottom four corners of this

unit and the top of the rack, etc.

• Do not install this unit on top of a slanted surface. This unit may

fall over and cause injury.

• Make sure you wipe the surface of the rack, etc. before securing

the fasteners. Applying the tape to a dirty or wet surface will

weaken the sticking power of the tape, and this unit may fall as

Installation