Publicité
Les langues disponibles
Les langues disponibles
FM tuning
3
Press SEARCH repeatedly until the AUTO
indicator disappears from the front panel
display.
No colon (:)
If a colon (:) appears in the front panel display, tuning
is not available. Press PRESET/TUNE to turn the
colon (:) off.
4
Press ENTRY
(
desired station manually.
y
Hold down the button for quick search.
Automatic preset tuning
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals (A1 to E8: 5 preset
station groups with 8 preset station numbers each). You
can recall the preset stations easily by selecting the preset
station groups and numbers.
1
Set the operation mode selector to TV/AV.
TV/AV
YSP
52
En
SEARCH
/
) to tune into the
ENTRY
ENTER
2
Press FM to select FM as the input source.
"FM" appears in the front panel display.
FM
y
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If "XM" appears in the front panel display, press FM/XM
again to display "FM" (U.S.A. and Canada models only).
3
Press and hold MEMORY for more than three
seconds.
The preset station group and number, the MEMORY
indicator, and the AUTO indicator flash. Automatic
preset tuning starts from the current frequency and
proceeds toward higher frequencies.
MEMORY
Flashes
Flashes
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
Notes
• When you overwrite an existing preset station, the
previously stored FM station is cleared.
• If the number of automatically preset stations does not
reach 40 (E8), this unit automatically stops searching.
• Only FM stations with sufficient signal strength are preset
automatically. If the desired station is weak in signal
strength, tune into it manually and store it as described in
"Manual preset tuning" on page 53.
Publicité
