Yamaha HTY-7040 Mode D'emploi page 9

Front panel
3
AUX 3
1 Front panel display
Shows information about the operational status of this
unit.
2 Remote control sensor
Receives infrared signals from the remote control.
3 AUX 3 input jack
Connect your portable audio player (see page 27).
4 INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO
SETUP (see page 38).
5 INPUT
Press repeatedly to switch between input sources (see
page 47).
Outputs a test tone to experience the sound beam (see
page 98).
Controls and functions
AUX 3 INTELLIBEAM MIC
4
INTELLIBEAM MIC
INPUT
1 2
5 6
+
INPUT VOLUME
6 VOLUME +/–
Controls the volume level of all audio channels (see
page 49).
7 STANDBY/ON
Turns on the power of this unit or sets it to the standby
mode (see page 33).
Notes
• When you turn on this unit, you will hear a click sound
followed by the 4 to 5-second interval before sound
reproducing.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control or to search for HDMI signals.
Controls and functions
VOLUME + STANDBY/ON
7
STANDBY/ON
7
En