Yamaha HTY-7040 Mode D'emploi page 13

Masquer les pouces Voir aussi pour HTY-7040:

Les langues disponibles

Remote control (Europe, Australia, Asia, and Korea models)

This section describes the functions of the remote control

used to control this unit. Some buttons marked with an

asterisk (*) share the common functions between the YSP

and TV/AV operation modes (S).

You can also control other components using the remote control

once you set the appropriate remote control codes. See

"Controlling other components" on page 104 for details.

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 STANDBY/ON

Turns on the power of this unit or sets it to the standby

mode (see page 33).

3 Transmission indicator

Lights up when infrared control signals are being output.

4 Input selector buttons

Use to select an input source (DVD, AUX1, AUX2,

AUX3, STB, TV, or FM).

Turns on or off the volume modes (see page 71).

6 AUTO SETUP

Enters the AUTO SETUP menu (see page 37).

7 CINEMA DSP program buttons

Select the CINEMA DSP programs (see page 65).

Turns on or off the Music Enhancer (see page 70).

9 Cursor buttons

Select and adjust SET MENU items.

Displays information on the selected input signal.

A VOLUME +/–

Increases or decreases the volume level of this unit (see

Mutes the sound. Press again to restore the audio output to

the previous volume level (see page 49).

Toggles between the input sources on the TV (see

Adjusts the volume level of each channel (see page 91).

Outputs a test tone when adjusting the output level of each

channel (see page 90).

Controls and functions