Yamaha HTY-7040 Mode D'emploi page 64

Masquer les pouces Voir aussi pour HTY-7040:

Les langues disponibles

ENJOYING STEREO SOUND

You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control.

• When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes

compressed. If the volume level decreases to the extreme, use other beam modes except My Beam.

• When the 2-channel or 5-channel stereo playback is selected as the beam mode, the surround modes (see page 58) and the CINEMA

DSP programs (see page 65) become ineffective.

(U.S.A. and Canada models)

2-channel stereo playback

Sounds are output from the front right and left channels.

This is ideal for playing back hi-fi sources, such as CDs,

and can be used to replace your TV speakers.

Set the operation mode selector to YSP.

Press STEREO to select the 2-channel stereo

playback as the beam mode.

"STEREO" appears in the front panel display.

Enjoying stereo sound

When you play back multi-channel sources, all signals except

those from the front left and right channels are mixed down and

output from the front left and right channels. No audio is output

from the center and surround channels.

5-channel stereo playback

Sounds are output from front left and right, center, and

surround left and right. This is ideal for playback in a large

listening area or at a party.

Set the operation mode selector to YSP.

Press STEREO twice to select the 5-channel

stereo playback as the beam mode.

"5CH STEREO" appears in the front panel display.