Publicité
Les langues disponibles
Les langues disponibles
Adjusting the audio balance
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back
in each beam mode to achieve a more true-to-life surround sound experience.
Using the test tone
You can use the test tone feature to output a test tone from
each channel to manually balance the channel levels.
Use this to set the channel levels so that the volume level
of each channel is identical when heard from your
listening position.
ENHANCER
CAT/
A-E
DISPLAY
VOLUME
MUTE
CH LEVEL
(U.S.A. and Canada models)
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press TEST.
"TEST FRONT L" appears in the front panel display
and a test tone is output from the front left channel.
90
En
Adjusting the audio balance
ENTRY
MENU
TV/AV
ENTER
YSP
RETURN
CH
TV VOL
TV INPUT
TV MUTE
CODE SET
TEST
TEST
3
Press
/
to select the channel you want
to adjust.
The front panel display changes as follows:
ENTER
Note
"TEST SUBWOOFER" is only available when a subwoofer
is connected to this unit and SWFR is selected for BASS
OUT in SOUND MENU (see page 83).
4
Press
/
to adjust the channel volume.
Control range: –10.0 dB to +10.0 dB
TEST FRONT L
TEST CENTER
TEST FRONT R
TEST SUR.R
TEST SUR.L
TEST SUBWOOFER
ENTER
Publicité
