Yamaha HTY-7040 Mode D'emploi page 7

Notes
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner's manual for each component.
• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
• y indicates a tip for your operation.
• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1
Install this unit in your listening room.
See "Installation" on page 17.
2
Connect this unit to your TV and other external components.
See "Connections" on page 20.
3
Prepare the remote control and turn on the power of this unit.
See "Getting started" on page 32.
4
Run AUTO SETUP.
See "AUTO SETUP (IntelliBeam)" on page 37.
5
Play back a source.
See "Playback" on page 47.
6
Change the beam modes and/or CINEMA DSP settings.
See "Enjoying surround sound" on page 56.
7
Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See "MANUAL SETUP" on page 76 and "Remote control features" on page 103.
Using this manual
If you want to make additional settings
and adjustments
Using this manual
5
En