General Aspects / Selecting The Position - Tunze Multicontroller 7096 Mode D'emploi

General aspects
TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor,
which can be adjusted and programmed by computer when attached by USB cable. The controller has
been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the
settings stored even in case of a power failure:
For adjustment by computer, the Multicontroller does not need a connection to the pumps in the tank.
After adjustment by and saving on the computer, the data remain saved in the Multicontroller as well.
TUNZE® Multicontroller 7096 comprises the functions of Multicontroller 7095 and Wavecontroller 6091 as
well as some other new control possibilities. It simulates various marine flow conditions in the aquarium
and has been fitted with an especially bright LED moonlight.
Scope of delivery: Multicontroller with photo-electric cell, moonlight, holder and 5 m (196.8 in.) USB cable,
four connection cables, CD with Windows compatible control program.
Suitable for MS-Windows 98, 2000, XP, Vista, Win7, Win8 and Mac.
Selecting the position
(1) The suitable wall has to be dry and protected against splashing water and humidity. By no means attach
above the aquarium !
(2) Observe the cable length of the units because connecting cables or photo-electric cells may not be
extended.
Control lamps should be visible; the Foodtimer should be easily accessible !
(3) Place the cable connections in such a way that water cannot run down the cables and enter the
Multicontroller.
Place any connected photo-electric cell in the illuminated area under the aquarium lighting.
57