Accessories - Tunze Multicontroller 7096 Mode D'emploi

Accessories

Branch adapter 7092.34 (1)
The branch adapter extends a pump output of Multicontroller 7096 to two additional outputs. Thus, two
Turbelle® pumps can be connected to one socket and can be operated in parallel. For this reason, up to
six pumps can be connected to Multicontroller 7096 fitted with a branch adapter 7092.34; using two branch
adapter will permit operation of up to eight pumps.
Pump adapter 7094.40 (2)
Pump adapter 7094.40 acts like a pump driver. It is for use only with the asynchronous motor of Turbelle®
classic 2002 and 4002 (3). A pump adapter can be operated at a maximum of up to 300 W ! Using
commercially available distributors up to four Turbelle® classic can be connected to a pump adapter. For
this reason, only two pump adapters are required to control up to eight Turbelle® classic to ensure low and
high tide control with two channels. The guarantee is void pumps of other manufacturers are operated.
103